Buy any PROFESSIONAL Ultrasonic Cleaner and get1L of cleaning fluid
All of our professional Ultrasonic Cleaners and baths are suitable for carburettor cleaning and have been designed for use in a demanding commercial environment. The most common tank sizes for carburettor cleaning are from 3Ltr (small carbs) upto 27Ltr and there is also special elongated model for cleaning banks of motorbike carbs off multi-cylinder engines. All the ultrasonic cleaning tanks are made from stainless steel and built to operate quietly in the workplace. They are suitable for all day, everyday use and are made to last. A guide to Motorcycle Carburettor cleaning
Size matters. When considering which ultrasonic cleaner to buy, the primary consideration has to be the size of tank. It's not the volume that's important, but the internal dimensions. The question to consider is whether the carburettor you need to clean will fit inside the tank and the only real way to be certain is to measure it. Also take into consideration that if you want to use a steel basket in the machine (and most people do), it can reduce the workable size by up to 8mm all round. The specification for each ultrasonic cleaner shows all the important dimensions.
Which model do I buy? In this professional ultrasonic carburettor cleaning category, there are three versions for most sizes of ultrasonic cleaner. In summary, the more money you pay for a model, the greater control you have over the cleaning process. The "manual" (dial adjustment) has limited control. The "digital" range gives you full control over all aspects of the cleaning operation and importantly, you have an LED display showing the temperature of the water (it helps stop the operator plunging their hand into hot water). And finally the degassing model can give a deeper clean. At the heart of any ultrasonic cleaner is a transducer. This is the component that produces the ultrasonic cleaning waves. The more transducers fitted to an ultrasonic bath, the better the cleaning will be. If you want to clean a bank of 4 carburettors off a motorbike but don't want to separate them, the 20Ltr model will be the best size for you.
1) Manual adjustment cleaners. These more basic models have a simple knob or dial to set the cleaning cycle time (0-20 mins) and temperature (20 - 80 degrees C). There is no LED display.
2) Digital adjustment cleaners. These models have a push button to set the cleaning time (0-99 mins) and temperature (0 - 80 degrees C) with an LED display. The cleaning can be stopped mid-cycle and the temperature shows both the "target / set" temperature and actual water in the tank. In a workplace environment and working with hot water, there might be a health and safety implication that requires the tank temperature to be visible to prevent scalding.
3) Digital adjustment with degassing cleaners. As above but additionally these ultrasonic cleaners have the technical function of a de-gassing mode which after a change a cleaning solution, quickly removes air from the liquid that in turn, makes the cleaning process more effective. This is especially useful when cleaning carburetors. Additionally, the ultrasonic cleaning power can be increased or reduced depending on the items being cleaned which means that delicate products can be cleaned gently.
Why use a basket? Stainless Steel baskets are optional on all of the Stainless Steel models shown below.
Dental Ultrasonic Cleaner, Ultrasonic Jewellery Cleaner, Ultrasonic Carburettor Cleaner, Ultrasonic cleaning solutions, Connoisseurs Jewellery Cleaner,