Digital With Degas

digital ultrasonic cleaners with degassing

Degassing is standard on all our DK Sonic digital ultrasonic cleaners. What is degassing? Read here >>>>.

Digital models have a push button to set the cleaning time (0 - 99 minutes) and temperature (0 - 80 degrees C) with an LED display. The cleaning can be stopped mid-cycle and the temperature shows both the target and actual water temperature in the tank. In a workplace environment and working with hot water, there might be a health and safety implication that requires the tank temperature to be visible to prevent scalding by an employee, for example in a dental practice or garage.

Degassing is where the ultrasonic tank has a pre-programmed cycle to remove microscopic air bubbles from the cleaning fluid. The cleaning fluid is optimised to give the most efficient clean possible, perfect for applications such as carburettors with many small bores and blind holes.
Digital control cleaners do not clean to a better standard than analogue models, but they do have greater control over the heating and ultrasonic cycle times. An analogue (dial control) machine has a maximum run time of 20 minutes. Digital versions can run up to 99 minutes.
Showing 9 of 9 results