Eurosonic 4D ultrasonic cleaner is the most advanced digital ultrasonic tank in the Euronda Pro System range. It has an LED backlit controller and it is intuitive and is user-friendly thanks to the light signals associated with different cycles, times and temperatures.
MADE IN ITALY
There are two operational modes, allowing users to choose one of the 6 preset cycles (instruments, burs, impression trays, cement removal, plaster removal, and prostheses) or run a free cycle at a temperature between 30°C and 60°C, with a duration between 10 and 40 minutes. Eurosonic 4D has a drain on the back and it comes with a tap and pipe, as well as side handles for easier movement.
Six pre-set ultrasonic cleaning cycles:
- Instruments (20 minutes at 40 degrees)
- Burrs (10 minutes at 40 degrees)
- Impression bite trays (40 minutes at 60 degrees)
- Cement removal (10 minutes at 30 degrees)
- Plaster removal (30 minutes at 60 degrees)
- Dentures (40 minutes at 60 degrees)
Four different operating modes for more effective cleaning:
Degas mode: Always the first one as it prepares the liquid for a better cleaning efficacy.
Boost mode: Used to clean the instrumentation from coarse impurities.
Normal mode: the immersed instrumentation is micro-brushed and the use of enzymatic powders or detergents delivers a cleaning effect of the highest quality.
Sweep mode: the frequency is made to swing around the base frequency, so that the waves propagate evenly throughout the tank, enhancing cavitation to the maximum and optimising cleaning.
|Tank Size||3.8 Litre|
|Basket size||300 x 100 x 150mm|
|Temperature range||30 - 60 degrees centigrade|
|basket & lid||